slick surface qa stamp, 11/16 qc stamp, plastic pre ink inspection stamp, metal quality assurance stamp, multisurface ink, MaxLight, iStamp IS-34

aeromark logo
AEROMARK
3725 Valley Quail Lane
Klamath Falls, OR 97603
Tel (541) 205-5606
Tel (800) 447-9668
aerostamps@aol.com
Hours: 9 to 5, Monday through Friday
fast service logo
multi surface pre inked inspection stamp

These pre-inked inspection stamps may now be made with a multi-surface ink (MSI-11/16). This ink in these stamps works well on paper, glossy paper, mylar, and most plastics and metals; it is particularly suitable for cases where stamping a mixture of paperwork and nonporous labels is required and also as a temporary parts marker. (While it leaves a good impression on metals and plastics, the impression is fairly easily removed with solvents.) Drying time to smudge resistance: 60 seconds.

Available in black, red & blue. Multi-Surface stamps are re-inkable with special Multi-Surface ink. Note: the dust cap must be kept on when the stamp is not in use as they will dry out in short order. If you do leave the cap off, replace it and the stamp will rejuvenate itself in 24 hours.

These stamps tend to use more ink than ordinary self inking stamps. We recommend ordering extra ink with your stamps if they are to be used regularly. Multi-Surface ink is available in 6 cc bottles and sells for $4.25. Multi-Surface ink is also available in 2 oz bottles and sells for $24.10.

multi surface pre inked inspection stamp

MSI-11/16 Usable Area 11/16", 17mm

These Stamps are available in black, red or blue ink, other colors can be custom ordered.

The sample impressions below will give some sort of an idea of the uses for these versatile stamps. Due to differences in computer & displays, the images may not be to scale. Check the dimensions on your ruler!

MSI-34 sample impressions